The error message “DHCP error” is displayed on the LCD

LiveShell PRO will try to connect to a saved wireless or wired LAN to go online.

There may be situations where LiveShell PRO fails to connect and the error message “DHCP error” appears on the device screen.

Please check the following guide if “DHCP error” is shown.

<Point 1>
Make sure you have the latest firmware.

If you do not have the latest firmware, please try updating and then check if the problem is resolved.
For information on how to check and update firmware, see the following links.

*How to check the current LiveShell PRO firmware version
*Firmware update

<Point 2>
Please check the SSID and password are correct

“DHCP error” will occur when the wrong SSID or password is entered.

<Point 3>
Please wait a few minutes and try connecting again

If LiveShell PRO sometimes succeeds in connecting and sometimes displays an error message. The problem may possibly be caused by temporary network issues.

If you cannot solve the problem

Please contact our support team (support-global@cerevo.com) and include the following information.

  • “DHCP error” is displayed on the LCD.
  • You have already checked the points above.
  • When the problem first happened and any other solutions you have tried.
    (e.g.) The problem happened 3 days ago and has not been solved yet. I tried 10 times using different routers and always “DHCP error” is displayed.