Cannot add new network settings

Normally you are able to add a nework settings by following the steps at this link.

However there could be a case that adding network does not succeed.

The Play button is shown on the setup page but nothing happens after clicking it.
a

Please check the following things if a similar problem happen.

<Point 1 >
Please check if the PC or smartphone audio out and LiveShell PRO MIC-IN are connected securely using the included setup cable.

Setup information is sent via sound from the PC or smartphone to LiveShell PRO and can fail if there is not a secure connection.

 

b

<Point 2>
Please check if the PC or smartphone is set to max volume

Setup information is sent via sound from the PC or smartphone to LiveShell PRO and setup may fail if the PC or smartphone volume level is too low or muted. We recommend that the PC or smartphone is set to max volume before pressing the play button on the setup page.

<Point 3>
Please check the PC or smartphone is not playing any other audio

LiveShell PRO cannot receive the correct setup information if the PC or smartphone is playing any other audio as setup information is sent as sound.

When the problem is not solved

Please contact our support team (support-global@cerevo.com) and include the following information.

  • That you have already checked the points above.
  • The current firmware version of your LiveShell PRO
  • Which brower (Internet Explorer, Google Chrome, Firefox etc.) and version you are using.