Note: The LiveShell 2 should only be reset when it is not in the normal operating mode.

  1. Press and hold the power upper left side and the lower right buttons at the same time for 5 seconds.
  2. The LiveShell 2 is now turned off.

Initialize (Factory Reset)

  1. Once the display states that the LiveShell 2 is offline, press the button at the top right.
  2. Select “Initialize” by pressing the lower left button.  Press the top right button and display initializing screen.
  3. Select “Yes” by pressing the lower right button and go to initialize by pressing the top left button.

Note: The firmware version will remain the same even after initialization.