6-1. Firmware Upadate

 

How to update from button control

1. Make sure you are offline.
2. Connect the AC adapter to the LiveShell 2
3. Start the livestreaming ustream so that you are then online.
4. Press power the button at the top left and select “Power-Off.”
5. If a newer firmware has been released, your LiveShell will begin to automatically update the firmware.
   Note: Do not unplug the AC adapter or remove the batteries while the firmware is being updated.

How to update from Dashboard

1. Connect the AC adapter to the LiveShell 2.
2. Open the Dashboard.
3. If there is a new firmware update, the notice will be displayed .

1. Click “Update now.”

1. Read the note and click on “Update.”

1. Your LiveShell will begin to automatically update the firmware and will reboot.
   Note: Do not unplug the AC adapter or remove the batteries while the firmware is being updated.
2. The status after rebooting is set by “After Online” settings. (The default is ” Auto Broadcast “)