While in the Local Mode, the video image and sound are transmitted to a specific RTMP server in a completely closed LAN, and do not connect to the “Dashboard.”
This mode is meant for transmitting confidential video images that that do not come out of a LAN, and for point-to-point video streaming.
This mode is meant for transmitting confidential video images that that do not come out of a LAN, and for point-to-point video streaming.
- Open Local mode settings from the footer of main page.Select Wi-Fi or Ethernet
- Wi-Fi settingsInput ESSID and passphrase.
- Ethernet settingsFor DHCP, make sure that the “Use fixed IP address” option has not been selected. Instead, proceed to the RTMP server settings.
- RTMP server settingsSet the broadcasting URL and the stream of the RTMP server.
* For a URL that changes each time, select “Can not use this URL over and over.”
* When an RTMP authentication is needed, select “Use RTMP authentication” and enter the username and password.
Click “OK,” and proceed to the transferring voice authentication equipment. - Transferring voice authentication equipmentFor immediate use, click the play button.
Confirm that the PC is connected to the LiveShell 2 by the setting cable and that the volume of the PC at the maximum level.
By selecting “Download,” the audio file will be downloaded, and can be saved. Connect the PC to the LiveShell 2 with the setting cable to play the file with Media Player or similar applications. - At this point, the LiveShell 2 should connect to the network and start broadcasting.
* It should be noted that the broadcast settings are not changed by the Dashboad, but by the control button.