How to update from button control
- Make sure you are offline.
- Connect the AC adapter to the LiveShell PRO
- Start the livestreaming ustream so that you are then online.
- Press power the button at the top left and select “Power-Off.”
- If a newer firmware has been released, your LiveShell will begin to automatically update the firmware.
Note: Do not unplug the AC adapter or remove the batteries while the firmware is being updated.
How to update from Dashboard
- Connect the AC adapter to the LiveShell PRO.
- Open the Dashboard.
- If there is a new firmware update, the notice will be displayed .
- Click “Update now.”
- Read the note and click on “Update.”
- Your LiveShell will begin to automatically update the firmware and will reboot.
Note: Do not unplug the AC adapter or remove the batteries while the firmware is being updated. - The status after rebooting is set by “After Online” settings. (The default is ” Auto Broadcast “)
Release Note
Firmware Rev.3737 (2015.11.18)
Main Improvements
- Added properties(audioonly, videoonly, avcprofile, avclevel and aacoat) to onMetaData Object of RTMP live streaming.
- Added a menu to show Wi-Fi MAC address.
- Added changes to make timestamps, including AVC/AAC sequence headers, always increase.
Firmware Rev.3663 (2015.5.15)
Main Improvements
- Fixed the problem that the following menu Broadcasting becomes English even if the language set to Japanese.
Firmware Rev.3662 (2015.2.5)
Main Improvements
- Fixed the problem that can not connect some kind of WiFi AP.
Firmware Rev.3660 (2015.1.6)
Main Improvements
- Fixed the problem that can not find some kind of SSID.
Firmware Rev.3637 (2014.10.10)
Main Improvements
- Fixed the problem that can not connect some WiFi AP.
Firmware Rev.3636 (2014.10.9)
Main Improvements
- Fixed the problem that the frame rate does not increase thereafter if FPS is set 0 when it is set to a variable frame rate.
Firmware Rev.3624 (2014.5.15)
Main Improvements
- Fixed the problem that video biterate was kept low continuously in the local mode.
- Fixed the problem that the fine shift occurs to the time stamp on the RTMP delivery time.
- Modified to perform automatically restart the abend
Firmware Rev.3592 (2014.2.25)
Main Improvements
- Fixed an issue in which can fail to recognize the HDMI input when it was turned on the power.
Firmware Rev.3518 (2013.8.20)
Main Improvements
- Improved the problem that the key input of the LiveShell PRO becomes ineffective.
Firmware Rev.3514 (2013.7.18)
Main Improvements
- Changed Dashboard API access to HTTPS for security issues.
- Fixed a problem where the device could not detect a disconnect cable when used with a fixed IP and Ethernet (not WiFi).
- Fixed a problem where the device could not broadcast the initial time when it had been changed from the RTSP server mode to the RTMP mode.
Firmware Rev.3495 (2013.4.8)
Main Improvements
- Support RTSP server function.(Support act as Wirecast IP camera source for AXIS M1104)
- Fixed a problem where the wrong color was entered for YUV and RGB.
Firmware Rev.3484 (2013.3.13)
Main Improvements
- Fix the problem stating that the Audio display adjustment is broken.
Firmware Rev.3483 (2013.3.8)
Main Improvements
- Supported RTMP authentication of LimeLight and Akamai.
- Fixed a problem that reconnected when LiveShell was on high load.
Firmware Rev.3480 (2013.1.23)
Main Improvements
- Fixed a problem where the device repeatedly disconnected and reconnected every 16.777 second in other RTMP service.
- Fixed a problem where there was a a delay in reconnecting.
- Support LimeLight RTMP Authentication.
- Fixed a problem where the status does not allow a custom mode even if mono / statements of the audio from the Dashboard are set to custom, and the setting reverts when it goes offiline.
- Support monitor output in paused.
Firmware Rev.3457 (2012.12.6)
Main Improvements
- Fixed a problem where the aspect of AV-IN can not be changed if manual crop setting in HDMI is set.
- Fixed a problem where the last image is kept to output in monitor output when you stop livestreaming.
- Support change mode of monitor output NTSC or PAL.
- Improve the stability of the wireless LAN connection